Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 360 / 500

14. USING A DIRECT DRIVE MOTOR
14 - 27
14.5 Parameters
CAUTION
Never make a drastic adjustment or change to the parameter values as doing so will
make the operation unstable.
If fixed values are written in the digits of a parameter, do not change these values.
In this servo amplifier, the parameters are classified into the following groups on a function basis.
Parameter group Main description
Basic setting parameters
(No.PA
)
Make basic setting with these parameters.
Gain/filter parameters
(No.PB
)
Use these parameters when making gain adjustment manually.
Extension setting parameters
(No.PC
)
When changing settings such as analog monitor output signal, use
these parameters.
I/O setting parameters
(No.PD
)
Use these parameters when changing the I/O signals of the servo
amplifier.
Special setting parameters
(No.PS
)
Use these parameters when setting specially for the direct drive servo.
Option setting parameters
(No.Po
)
These are only for MR-J3W.