Mitsubishi Electric MELSERVO-J3W Series, Instruction Manual

Page: 441 / 500

15. MR-J3W-0303BN6 SERVO AMPLIFIER
15 - 36
15.5 Parameters
POINT
This section explains parameters only for MR-J3W-0303BN6. Refer to chapter 5 for
the other parameters.
15.5.1 Basic setting parameters (No.PA
)
Parameter
No. Symbol Name
Each/
common
Default
value
Unit
Setting
range
PA19 *BLK Parameter writing inhibit Each 000Bh Refer to
the text.
POINT
To enable the parameter value, cycle the power or reset the controller after setting
the parameter.
In the factory setting, this servo amplifier allows changes to the basic setting parameter, the gain/filter parameter
and the extension setting parameter settings. With the setting of parameter No.PA19, write can be disabled to
prevent accidental changes.
The following table indicates the parameters which are enabled for reference and write by the setting of
parameter No.PA19. Operation can be performed for the parameters marked .
PA19 setting
Setting
operation
Basic setting
parameters
No.PA
Gain/filter
parameters
No.PB
Extension
setting
parameters
No.PC
I/O setting
parameters
No.PD
(Note)
Special
setting
parameters
No.PS
Option
setting
parameters
No.Po
Manufacturer
setting
parameters
No.PE
Other
function
parameters
No.PF
Reference 0000h
Writing
Reference 000Bh
(default value) Writing
Reference 000Ch
Writing
Reference 000Dh
Writing
Reference 000Eh
Writing
Reference 00ABh
Writing
Reference 100Bh
Writing PA19 only
Reference 100Ch
Writing PA19 only
Reference 100Dh
Writing PA19 only
Reference 100Eh
Writing PA19 only
Reference 10ABh
Writing PA19 only
Note. When using a rotary servo motor, you do not use the parameter.