Kyocera C2525E, Advanced Operation Manual

Page: 328 / 374

Troubleshooting
9-4
Printer output is fuzzy. Is the printer in a high humidity
environment? Perform a drum refresh. page 7-36
Is the copy paper damp? Replace the copy paper with new paper. Refer to
Operation
Guide
,
Chapter 2
Is special color copy paper being used? Use special color copy paper. —
Printing is skewed. Are the originals loaded correctly? When placing originals on the platen,
place them face-down and flush against
the original size indicator plates. Refer to
Operation
Guide
,
Chapter 2
When placing originals in the document
processor, align the original width
guides securely before placing the
originals. Refer to
Operation
Guide
,
Chapter 2
Is the paper loaded correctly? Check the position of the paper width
guides. Refer to
Operation
Guide
,
Chapter 2
Paper jams frequently
occur. Is the paper loaded correctly? Load the paper correctly. Refer to
Operation
Guide
,
Chapter 2
Is the paper of the supported type? Is it
in good condition? Remove the paper from the cassette,
turn it over, and reload it. Refer to
Operation
Guide
,
Chapter 2
Is the paper curled, folded, or wrinkled? Replace the paper with new paper. Refer to
Operation
Guide
,
Chapter 2
Are any loose scraps of paper or is
there any jammed paper inside the
device? Remove any jammed paper. Refer to
Operation
Guide
,
Chapter 6
Is the copy paper damp? Replace the copy paper with new paper. Refer to
Operation
Guide
,
Chapter 2
Is special color copy paper being used? Use special color copy paper. —
Copies from the optional
document processor
have black lines. Is the slit glass dirty? Clean the slit glass. Refer to
Operation
Guide
,
Chapter 5
Copies from the 3000
sheet document finisher
are curled. — Remove the paper from the cassette,
turn it over, and reload it. Refer to
Operation
Guide
,
Chapter 2
Symptom Checkpoints Corrective Actions Reference
Page