Kyocera C2525E Advanced Operation Manual Download Page 307

Page: 307 / 374

Job Accounting

8-7

Limitation (Full Color)

Set the usage total usage limit for full color copying and full color printing. The setting items are as
follows.

NOTE:

This setting is not displayed when both

Restricting Copying

(see page

8-5

) and

Restricting

Printing

(see page

8-6

) are set to [Is not permitted] ([Is not permited]).

Even if the page count set in [Counter Limit] is not exceeded, when the count exceeds the value set
in

Limitation (All)

(see page

8-6

) the feature is disabled or a warning message is displayed.

Refer to steps 1 to 9 of

New Account

on page

8-4

on page to display the usage restriction screen.

Press [

] or [

] to select

Limitation (Full-Color )

(

Limitation (Full-Colour)

) and press [Change #].

Select [No limit], [Counter limit] or [Is not permitted] ([Is not permited]).

When [Counter limit] is selected, use the numeric keys to enter the page limit.

Press [Close] to save settings or [Back] to cancel settings. The touch panel will return to the usage
restriction screen.

Restricting Transferring Scanned Image

Set limitations for scanner usage. The setting items are as follows.

NOTE:

This item is not shown when Job Account default setting

Scanner Job Accounting

(see

page

8-19

) is set to [Off].

Refer to steps 1 to 9 of

New Account

on page

8-4

on page to display the usage restriction screen.

Press [

] or [

] to select

Scanner transmission

and press [Change #].

Select [No limit], [Counter limit] or [Is not permitted] ([Is not permited]).

When [Counter limit] is selected, use the numeric keys to enter the page limit.

Press [Close] to save settings or [Back] to cancel settings. The touch panel will return to the usage
restriction screen.

Item

Description

No limit

Do not limit the page count for full color copying and full color printing.

Counter limit

Limit the total number of pages used by the full color copier and full
color printer functions to between 1-999,999 pages (1 page
increments).

Is not permitted (Is not
permited)

Disable full color copying and full color printing.

Item

Description

No limit

Do not limit the number of pages read by the scanner.

Counter limit

Limit the total number of pages read by the scanner to between
1-999,999 pages (1 page increments).

Is not permitted (Is not
permited)

Disable scanner usage.

Summary of Contents for C2525E























































































































































































































































































































































































Search results

Summary of Contents for C2525E

Reviews:

Related manuals for C2525E

Brands by name

Popular brands

Kyocera C2525E, Advanced Operation Manual

Search results

Summary of Contents for C2525E

Reviews:

Related manuals for C2525E

Brands by name

Popular brands