Kyocera C2525E, Advanced Operation Manual

Page: 153 / 374

Scanner Settings
4-11
6 Press [Change #] for Password confirm .
7 Enter the password again for verification and press [End].
8 Press [Close]. Display is returned to PDF Encryption .
9 Press [
S
] or [
T
] to select Encryption
Level and press [Change #].
10 Select [High Level 128bit] or [Low Level 40bit] and press [Close]. Display is returned to PDF
Encryption .
Proceed to Step 11 if a password was entered in Step 3 for Doc. Restriction Password .
Proceed to Step 17 if a password was entered in Step 3 for Document Open Password .
11 Press [
S
] or [
T
] to select Copy image and other cont and press [Change #].
12 Select [Allow] or [Refuse] and press [Close].
13
Press [
S
] or [
T
] to select and Changes Allowed and press [Change #].
14 Press [Comment], [Any except extract pg], [Change pg layout], [Insert/del/rotate pg], or [Refuse]
and press [Close].
NOTE: [Change pg layout] will be displayed when [Low Level 40bit] is selected for [Encryption
Level] and [Insert/del/rotate pg] will be displayed when [High Level 128bit] is selected.
15 Press [
S
] or [
T
] to select and Printing Allowed and press [Change #].
16 Select [Allow], [Refuse] or [Allow (Low Res.)] and press [Close].
NOTE: [Allow (Low Res.)] is displayed when encryption level is set to [High Level 128bit] under
Encryption Level .
17 Press [Close]. Display is returned to Sending file type .
Document Open Password
Doc. Restriction Password
Encryption Level
Copy image and other cont
Changes Allowed
Change #
Default menu Setting mode
PDF Encryption
Refuse
Back
Off
*****
.
Low Level (40bit)
Refuse
Place the original and select destination.
Original
11×8½"
08/0
Ready to scan. ( ) Full-Color