Figure 8-9 PDU8000 communication settings screen
Step 2 Add a PDU8000 (Modbus-RTU).
1. Log in to the ECC800-Pro WebUI as an administrator.
2. Add a PDU8000.
Table 8-12 Adding a PDU8000
Path
Parameter
Setting
Choose
System
Settings >
Device
Management
and click Add
Device. The
parameters
for adding
devices are
displayed.
Device
attribute
Select PDU from the drop-down list box.
Device Type
Select PDU8000 from the drop-down list
box.
Connect To
Select ECC800 from the drop-down list
box.
Communicati
ons Port
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the
PDU8000 is connected to the COM1 port on the
ECC800-Pro. If the PDU8000 is connected to
another port, select the number of the
connected port.
Device
Address
In this example, Device Address is set to 1.
During actual configuration, set the device
address for the PDU8000 based on the
actual situation.
3. Click Test Connect to check whether the PDU8000 is properly connected to
the ECC800-Pro.
–
If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
ECC800 Data Center Controller
User Manual
8 FAQ
Issue 04 (2021-10-09)
Copyright © Huawei Technologies Co., Ltd.
317
