Huawei ECC800 User Manual Download Page 310

Page: 310 / 409

running parameters, smart module plan view editing, and internal fault

information exporting.

Procedure

Step 1 Change the login password.

1. Log in to the ECC800-Pro WebUI as an administrator.
2. Choose Maintenance > User Management. The user management page is

displayed.

3. Choose the user to be modified and click Modify. Reset the login password on

the displayed page.

Figure 8-2 Changing the login password

4. Modify Advance expiration notification (days) and Timeout Interval for

the password.

5. Determine whether to enable multi-factor authentication based on user

requirements.

6. Select the notification mode.

ECC800 Data Center Controller

User Manual

8 FAQ

Issue 04 (2021-10-09)

298

Summary of Contents for ECC800


























































































































































































































































































































































































































Search results

Summary of Contents for ECC800

Reviews:

Related manuals for ECC800

Brands by name

Popular brands

Huawei ECC800, User Manual

Search results

Summary of Contents for ECC800

Reviews:

Related manuals for ECC800

Brands by name

Popular brands