Figure 5-9 eLight actuator position
Table 5-9 Access authorization
Access authorization
Description
Access authorization fails and the
aisle door cannot be opened.
Red light, blinking for 3 seconds
Access authorization succeeds and
the door can be opened.
Green light, blinking for 3 seconds
NO TE
– The eLight actuator is automatically associated with the nearest access actuator in the
smart module view.
– If there are one access actuator and two eLight actuators in an aisle, the access
actuator is automatically associated with the two eLight actuators.
----End
Follow-up Procedure
To modify the parameters of a single eLight, do as follows:
1. Choose Monitoring > Aisle > eLight Actuator Group > eLight Actuator. The
Running Parameters page is displayed.
2. Select the Associated alarm severity as required and click Submit.
ECC800 Data Center Controller
User Manual
5 Power-On Commissioning
Issue 04 (2021-10-09)
Copyright © Huawei Technologies Co., Ltd.
117
