manualshive.com logo in svg

Garmin G1000 NXi, Pilot'S Manual

Get the most out of your Garmin G1000 NXi with the Supplemental Maintenance Manual. Enhance your understanding of this advanced avionic system by accessing the comprehensive manual instantly - no strings attached. Experience hassle-free downloading from manualshive.com, delivering user manuals for free, empowering your aviation journeys.

Share
Download
background image

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

190-02177-02  Rev. A

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

I-2

INDEX

COM Frequency Box -------------------------------- 112, 117

Command Bars ---------------------------------------------369

COM Tuning Failure ----------------------------------------138

Conflict Situational Awareness (CSA) -------------------351

Connext Setup ----------------------------------------------452

Connext Weather -----------------------253, 257, 267, 305

Activating Garmin Connext Weather .....................252
Data Request ........................................................267
Infrared Satellite ...................................................286
Lightning ..............................................................283
METARs and TAFs .................................................288
PIREPs and AIREPs ................................................300
Precipitation .........................................................278
SIGMETs and AIRMETs ..........................................286
Symbols................................................................258

Control Wheel Steering (CWS) -------------------- 365, 392

Correlation --------------------------------------------------350

Course

Pointer ...................................................................53
Selection ................................................................54

Course Deviation Indicator (CDI) ----------------53, 57–61

Changing scale .....................................................507
Crosstrack Error (XTK) .............................................57
Flight Phase............................................................57
Lateral Deviation Scale ............................................57
Navigation Source ..................................................57
Scaling ...................................................................59

Crew Alerting System (CAS)

Annunciations ......................................................469
Inhibits .................................................................470

Current Heading -------------------------------------------- 53

Cylinder Head Temperature (CHT) ------------------------ 99

D

Data Logging -----------------------------------------------451

Day/Night Views ------------------------------------ 410, 416

DB Mismatch -----------------------------------------------483

Deleting

Deleting a Store Flight Plan ...................................213
Deleting the Active Flight Plan ..............................211

Departures --------------------------------------------------226

Loading ................................................................227
Removing .............................................................228

Direct-to ----------------------------------180, 181, 182, 183

Vertical Navigation Direct-to .................................220

Display and Key Backlighting (Brightness) -------------- 38

Display Backup ------------------------------------------------ 9

Display Backup Button ------------------------------------110

Display Pane ------------------------------------------------- 28

Display Units (Units of Measure) ------------------------- 31

Distance Measuring Equipment (DME)

Information Window ...............................................57

DME Audio --------------------------------------------------118

DME Tuning -------------------------------------------------122

E

Electrical

Battery ...................................................................99

Electronic Checklists -------------------------------- 463, 464

Electronic Stability and Protection 

(ESP) --------------------------------- 42, 401, 457, 458, 460

Emergency Checklist --------------------------------------463

Emergency Frequency -------------------------------------138

Engine manifold pressure

182T  ......................................................................91
206H ......................................................................95
T182T ....................................................................93
T206H ....................................................................97

Entering Flight ID ----------------------------------- 123, 127

Entertainment Inputs --------------------------------------135

Excessive Descent Rate (EDR) ----------------------------324

Exhaust Gas Temperature (EGT) -------------------------- 99

F

Fail-Safe Operation ----------------------------------------138

Fault Detection and Exclusion (FDE) --------------------- 17

Field of View (SVT) -----------------------------------------160

FIS-B Weather

METARs and TAFs .................................................288
NEXRAD ...............................................................274
PIREPs and AIREPs ................................................300
SIGMETs and AIRMETs ..........................................286
Status ...................................................................304
Symbols................................................................257

Flight Director (FD) ---------------------------363, 367–368

Pitch Modes .................................................370–376
Switching .............................................................366

Flight ID -----------------------------------------------------127

Flight ID, Traffic ---------------------------------------------345

Flight Level Change Mode --------------------------------374

Flight Path Angle (FPA)------------------------------------220

Flight Plan

Flight Plan View ....................................................187
Leg Type ...............................................................184
Origin Auto-Designation .......................................187
Retention after Shut Down ....................................184

Flight Planning

Activating a FP Leg ...............................................198
Adding Airways ....................................................195
Adding Waypoints ................................................191
Comment Changes ...............................................214
Creating ...............................................................189
Deleting ...............................................................211
Importing/Exporting Flight Plans ...........................206

Summary of Contents for G1000 NXi



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for G1000 NXi

RadonAway AIRaider EZ95 Installation Instructions Manual preview
AIRaider EZ95
Brand: RadonAway Pages: 22
Nikkei NMD315 User Manual preview
NMD315
Brand: Nikkei Pages: 28
Daewoo AXW-217 Service Manual preview
AXW-217
Brand: Daewoo Pages: 35
Teac CS-X8 Owner'S Manual preview
CS-X8
Brand: Teac Pages: 24
RCA RS2532 User Manual preview
RS2532
Brand: RCA Pages: 19
Iluv I9200 Instruction Manual preview
I9200
Brand: Iluv Pages: 40
Culligan Good Water Machine AC30 Owner'S Manual preview
Good Water Machine AC30
Brand: Culligan Pages: 16
Raymarine Autohelm 1000 User Manual preview
Autohelm 1000
Brand: Raymarine Pages: 15
LENCO MC-141 Instruction Manual preview
MC-141
Brand: LENCO Pages: 9
H2hOme NFPA13D Pump Assembly Removal & Installation Instructions preview
NFPA13D
Brand: H2hOme Pages: 2
Crosley CR44-CD Instruction Manual preview
CR44-CD
Brand: Crosley Pages: 2
Crosley Crosley Traveler Stack-O-Matic CR89-BT Owner'S Manual preview
Crosley Traveler Stack-O-Matic CR89-BT
Brand: Crosley Pages: 5
Crosley Band Master 3-in-1 Entertainer CR86 Instruction Manual preview
Band Master 3-in-1 Entertainer CR86
Brand: Crosley Pages: 8
Etec EFL400 User Manual preview
EFL400
Brand: Etec Pages: 12
Raymarine SmartPilot Series Operating Manual preview
SmartPilot Series
Brand: Raymarine Pages: 58
TerraTec PHASE X24 fw Manual preview
PHASE X24 fw
Brand: TerraTec Pages: 36
Palsonic PMC-191 Instruction Manual preview
PMC-191
Brand: Palsonic Pages: 8
Harman Kardon AVR 10 Service Bulletin preview
AVR 10
Brand: Harman Kardon Pages: 3

Brands by name

Popular brands

Load more brands