190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
355
HAZARD AVOIDANCE
a)
Press the
MENU
Key.
b)
Turn the small
FMS
Knob to highlight ‘Test Mode’.
c)
Press the
ENT
Key.
A test pattern of traffic symbols appears during the test, and a ‘TRAFFIC’ annunciation appears on the PFD.
At the conclusion of the test, the system issues the voice alert
“Traffic System Test”
. If the test pattern is
displayed and the voice alert is heard, the system has passed the test.
Figure 6-85 System Test in Progress with Test Pattern
ADS-B Test Mode
The pilot can select the volume of airspace in which Other Non-Threat and Proximity traffic is displayed.
TAs occurring outside of these limits will always be shown.
Changing the altitude range:
1)
On the ‘Map - Traffic Map’ Page, press the
ALT Mode
Softkey.
2)
Select one of the following softkeys:
•
Above:
Displays Other Non-Threat and proximity traffic from 9900 feet above the aircraft to 2700 feet
below the aircraft. Typically used during climb phase of flight.
•
Normal:
Displays Other Non-Threat and proximity traffic from 2700 feet above the aircraft to 2700 feet
below the aircraft. Typically used during enroute phase of flight.
•
Below:
Displays Other Non-Threat and proximity traffic from 2700 feet above the aircraft to 9900 feet
below the aircraft. Typically used during descent phase of flight.
•
UNREST
(unrestricted)
:
All traffic is displayed from 9900 feet above and 9900 feet below the aircraft.
3)
To return to the ‘Map - Traffic Map’ Page, select the
Back
Softkey.
Or
: