Garmin G1000 NXi Pilot'S Manual Download Page 443

Page: 443 / 538

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

190-02177-02 Rev. A

STEM

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

423

ADDITIONAL FEATURES

LANDING ALERTS

The On-Final phase-of-flight, as determined by the system, must be valid in order for the system to issue

Landing Alerts.

aXiWay

anDing

The Taxiway Landing alert is issued when the aircraft attempts to land on a non-runway (e.g. a taxiway)

or the aircraft is not aligned with a runway.

In addition to the visual and voice alert, the Information Box will display the destination airport identifier

and the text “APPROACHING TWY” to indicate a non-runway landing is being attempted.

unWay

hort

The Runway Too Short alert is issued when the aircraft attempts to land on a runway where the remaining

runway length is less than the required landing runway length entered in the Landing Data Screen.

Note that while the Runway Too Short alert may be issued for any runway with which aircraft is aligned,

the system will always calculate the runway length for the specific runway entered in entered in the Landing
Data Screen.

In addition to the visual and voice alert, the Information Box will display the destination airport identifier

and the text “APPROACHING REMAINING” to indicate a the remaining runway length.

heck

unWay

The Check Runway alert is issued when the aircraft attempts to land on a runway that does not match the

arrival runway specified in the Landing Data.

Additionally, the Information Box will display the destination airport identifier, the runway with which

the aircraft is aligned, and the distance to the runway.

Figure 8-26 Typical Information Displayed During a Check Runway Alert

Summary of Contents for G1000 NXi



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands

Garmin G1000 NXi, Pilot'S Manual

Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands