manualshive.com logo in svg

Garmin G1000 NXi, Pilot'S Manual

Get the most out of your Garmin G1000 NXi with the Supplemental Maintenance Manual. Enhance your understanding of this advanced avionic system by accessing the comprehensive manual instantly - no strings attached. Experience hassle-free downloading from manualshive.com, delivering user manuals for free, empowering your aviation journeys.

Share
Download
background image

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

190-02177-02  Rev. A

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

270

HAZARD AVOIDANCE

WEATHER PRODUCT OVERVIEW

The following is an overview of data link weather products the system can display.

NEXRAD (SIRIUSXM)

  NOTE:  

Datalink weather radar information cannot be displayed at the same time as relative terrain, echo 

tops, icing, or turbulence data.

The National Weather Service (NWS) operates the WSR-88D, or NEXRAD (NEXt-generation RADar) 

system, an extensive network of 156 high-resolution Doppler radar systems.  The NEXRAD network provides 
centralized meteorological information for the continental United States and selected overseas locations.  The 
maximum range of a single NEXRAD site is 250 nm.

Individual NEXRAD sites supply the network with radar images, and the images from each radar site may 

arrive at the network at different rates and times.  Periodically, the weather data provider compiles the available 
individual site images from the network to form a composite image, and assigns a single time to indicate when 
it created the image.  This image becomes the NEXRAD weather product.    Individual images--gathered from 
each NEXRAD site--differ in age, and are always older than the displayed NEXRAD weather product age.  The 
data provider then sends the NEXRAD data to the SiriusXM Weather service, whose satellites transmit this 
information during the next designated broadcast time for the NEXRAD weather product.

Because of the time required to detect, assemble, and distribute the NEXRAD weather product, the displayed 

weather information contained within the product may be significantly older than the current radar synopsis 
and may not depict the current weather conditions.  The NEXRAD weather product should never be used as a 
basis for maneuvering in, near, or around areas of hazardous weather regardless of the information it contains.

Figure 6-10  NEXRAD Weather Product on the ‘Map - Weather Data Link (XM)’ Page

For radar sites in the United States, the NEXRAD weather product shows a composite reflectivity image.  

This shows the 

highest

 radar energy received from multiple antenna tilt angles at various altitudes.  For radar 

sites based in Canada, the NEXRAD weather product shows radar returns from the lowest antenna tilt angle, 

Summary of Contents for G1000 NXi



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for G1000 NXi

KU Solar SKY PRO 10 CPC 58 Technical Manual preview
SKY PRO 10 CPC 58
Brand: KU Solar Pages: 50
Digital Flash Memory MP3 On-Hold User Manual preview
MP3 On-Hold
Brand: Digital Flash Memory Pages: 10
RCA RS2128i User Manual preview
RS2128i
Brand: RCA Pages: 2
MAC Audio CAP 1200F Owner'S Manual preview
CAP 1200F
Brand: MAC Audio Pages: 2
Hengbida Electronic Technology Sound Pad S1 Product Manual preview
Sound Pad S1
Brand: Hengbida Electronic Technology Pages: 19
JVC CA-UXF3B Instructions preview
CA-UXF3B
Brand: JVC Pages: 2
Sony SRS-ZR7 Service Manual preview
SRS-ZR7
Brand: Sony Pages: 28
Teufel hulsta Manual preview
hulsta
Brand: Teufel Pages: 28
Duronic RCD144 Operating Instructions Manual preview
RCD144
Brand: Duronic Pages: 9
J.E. Adams 6700A Manual preview
6700A
Brand: J.E. Adams Pages: 5
H20 Distributors USRO4-60-QC Installation And Service Manual preview
USRO4-60-QC
Brand: H20 Distributors Pages: 9
Akai AMD340 User Manual preview
AMD340
Brand: Akai Pages: 30
Simrad A2004 Quick Manual preview
A2004
Brand: Simrad Pages: 6
A.O. Smith LOTUS-75TC User Manual preview
LOTUS-75TC
Brand: A.O. Smith Pages: 54
Roberts Sound 80 User Manual preview
Sound 80
Brand: Roberts Pages: 36
Watts ISCA-101 Installation Instructions Manual preview
ISCA-101
Brand: Watts Pages: 18
Toa SB-38S Instruction Manual preview
SB-38S
Brand: Toa Pages: 8
Raymarine Pathfinder GyroPlus 2 Owner'S Handbook Manual preview
Pathfinder GyroPlus 2
Brand: Raymarine Pages: 40

Brands by name

Popular brands

Load more brands