Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
230
FLIGHT MANAGEMENT
Figure 5-67 Arrival Loading
Loaded Arrival
Selected Arrival
Procedure Loading Page Selection Softkeys
Loading an arrival into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Arrival’.
3)
Press the
ENT
Key. The ‘PROC – Arrival Loading’ Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select an arrival from the list and press the
ENT
Key.
6)
Select a transition (if required) and press the
ENT
Key.
7)
Select a runway (if required) and press the
ENT
Key. ‘Load?’ is highlighted.
8)
Press the
ENT
Key to load the arrival procedure.
Loading an arrival into the active flight plan from the ‘WPT – Arrival Information’ Page:
1)
From the ‘WPT – Airport Information’ Page (first page in the WPT group), press the
STAR
Softkey. The ‘WPT
– Arrival Information’ Page is displayed, defaulting to the airport displayed on the ‘WPT – Airport Information’
Page.
2)
To select another airport, push the
FMS
Knob to activate the cursor, enter an identifier/facility name/city, and
press the
ENT
Key.
3)
Select a different arrival, if desired.
a)
Turn the large
FMS
Knob to highlight the arrival. The arrival is previewed on the map.
b)
Turn the small
FMS
Knob to view the available arrivals. Press the
ENT
Key to select the arrival. The cursor
moves to the ‘Transition’ Box (only if there are available transitions). The arrival is previewed on the map.
