Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
308
HAZARD AVOIDANCE
Figure 6-57 ‘Map - Stormscope
®’
Page with Cell Mode Selected
Stormscope Mode
Lightning Strike Rate
Per Minute
Adjusting the Stormscope Map Range:
1)
Turn the large
FMS
Knob to select the Map Page Group.
2)
Turn the small
FMS
Knob to select the ‘Map - Stormscope®’ Page.
3)
Turn the
Joystick
clockwise to increase the map range or counter-clockwise to decrease the map range.
Selecting ‘cell’ or ‘strike’ mode:
1)
Select the ‘Map - Stormscope®’ Page.
2)
Press the
Mode
Softkey. The
Cell
and
Strike
softkeys are displayed.
3)
Press the
Cell
Softkey to display ‘CELL’ data or select the
Strike
Softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box in the upper right corner of the Stormscope Page.
4)
Press the
Back
Softkey to return to the top level softkeys for the Stormscope® Page.
Or
:
1)
Select the ‘Map - Stormscope®’ Page.
2)
Press the
MENU
Key to display the ‘Map - Stormscope®’ Page Menu. Either ‘Cell Mode’ or ‘Strike Mode’ is
highlighted in cyan to indicate the mode to be selected.
3)
Press the
ENT
Key to select the highlighted mode and remove the menu. To remove the menu without changing
modes, press the
MENU
Key or the
CLR
Key, or push the
FMS
Knob.