Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
488
APPENDIX B
Bluetooth
Status
Figure B-3 ‘Aux - Connext Setup’ Page
WiFi Status
WiFi Enabled
WiFi Password
8)
Verify the mobile device is enabled via Bluetooth in the Bluetooth settings on the mobile device.
9)
In the ‘Paired Devices’ Window on the ‘Aux - Connext Setup’ Page, ensure the system is paired with the mobile
device in use. (refer to Additional Features for instructions on connection to a preferred device).
NOTE:
The database updates may now be continued from any MFD page, however, the update windows
shown in these instructions will not be shown on the ‘Aux - Databases’ Page. Use the proceeding instructions
in this section to update databases from the ‘Aux - Databases’ Page.
10)
Press the
Update
Softkey when the following window appears. (Pressing the
View
Softkey will allow database
updates to be viewed from the ‘Aux - Databases’ Page, however, the windows shown below will not appear on
the ‘Aux Databases’ Page. Pressing the
Ignore
Softkey will postpone the updates until further action is taken.)
Figure B-4 Database Update Available
11)
If using a device that has not been previously paired with the system, a password prompt will appear on the
mobile device. Enter the password shown in the ‘Password’ Field of the ‘Aux - Connext Setup’ Page.
12)
The following window will appear. Database update progress may be monitored on the mobile device.
Figure B-5 Starting Database Transfer
