Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
236
FLIGHT MANAGEMENT
Loading an approach into the active flight plan using the PROC Key:
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Approach’, and press the
ENT
Key. The ‘PROC – Approach Loading’ Page is displayed.
3)
Select the airport and approach:
a)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
b)
Select an approach from the list and press the
ENT
Key.
Or
:
a)
If necessary, push the
FMS
Knob to exit the approach list, and use the large
FMS
Knob to move the cursor
to the ‘Channel’ Field.
b)
Use the
FMS
Knob to enter the approach channel number, and press the
ENT
Key to accept the approach
channel number. The airport and approach are selected.
4)
Select a transition (if required) and press the
ENT
Key.
5)
Minimums
a)
To set approach minimums, turn the small
FMS
Knob to select ‘BARO’ or ‘TEMP COMP’ and press the
ENT
Key. Turn the small
FMS
Knob to select the altitude, and press the
ENT
Key.
b)
If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the small
FMS
Knob to
select the temperature (as reported at the destination airport), and press the
ENT
Key.
Or
:
To skip setting minimums, select ‘OFF’ and press the
ENT
Key.
6)
Press the
ENT
Key with ‘Load?’ highlighted to load the approach procedure; or turn the large
FMS
Knob to
highlight ‘Activate’ and press the
ENT
Key to load and activate the approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT APPROVED FOR GPS –
GPS guidance is for monitoring only. Load approach?’ With ‘Yes’ highlighted, press the ENT Key.
Wh
en a visual approach is selected, the message ‘Obstacle clearance is not provided for visual approaches’ is
displayed. With ‘OK’ highlighted, press the
ENT
Key.
Loading an approach into the active flight plan from the ‘NRST – Nearest Airport’ Page:
1)
Select the ‘NRST – Nearest Airports’ Page.
2)
Push the
FMS
Knob, then turn the large
FMS
Knob to highlight the desired nearest airport. The airport is
previewed on the map.
3)
Press the
APR
Softkey; or press the
MENU
Key, highlight ‘Select Approach Window’, and press the
ENT
Key.
4)
Turn the
FMS
Knob to highlight the desired approach.
5)
Press the
LD APR
Softkey; or press the
MENU
Key, highlight ‘Load Approach’, and press the
ENT
Key. The
‘PROC – Approach Loading’ Page is displayed with the ‘Transition’ Field highlighted.
6)
Turn the
FMS
Knob to highlight the desired transition, and press the
ENT
Key.
