Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
196
FLIGHT MANAGEMENT
Figure 5-49 ‘FPL - Select Airway’ Page - Selecting Exit Point
Airway Entry Waypoint
Selected Airway
Airway Exit Points
Available
Selected Exit Point
Selected Airway Exit
Point
Preview of
Selected Airway
Adding an airway to the active flight plan:
1)
Press the
FPL
Key.
2)
Push the
FMS
Knob to activate the cursor (not required on the PFD).
3)
Turn the large
FMS
Knob to move the cursor below the airway entry waypoint for the insertion point. If there
is no valid airway entry waypoint in the flight plan, one must be entered first.
4)
Turn the small
FMS
Knob for the MFD one click clockwise and press the
LD AIRWY
Softkey, or press the
MENU
Key for the and select “Load Airway”(PFD or MFD). The
LD AIRWY
Softkey or the “Load Airway” menu item is
available only when a valid airway entry waypoint has already been entered in the flight plan.
5)
Turn the
FMS
Knob to highlight the desired airway from the list, and press the
ENT
Key. Low altitude airways
are shown first in the list, followed by “all” altitude airways, and then high altitude airways.
6)
Turn the
FMS
Knob to highlight the desired airway exit point from the list, and press the
ENT
Key. ‘Load?’ is highlighted.
7)
Press the
ENT
Key. The system returns to editing the flight plan with the new airway inserted.
Adding an airway to a stored flight plan:
1)
On the ‘FPL – Flight Plan Catalog’ Page, push the
FMS
Knob to activate the cursor.
2)
Highlight the desired flight plan.
3)
Press the
EDIT
Softkey; or press the
ENT
Key, turn the large
FMS
Knob clockwise to highlight “EDIT” and press
the
ENT
Key. The ‘FPL – Stored Flight Plan’ Page is displayed.
4)
Turn the large
FMS
Knob to move the cursor below the airway entry waypoint for the insertion point. If there
is no valid airway entry waypoint in the flight plan, one must be entered first.
5)
Turn the small
FMS
Knob one click clockwise and press the
LD AIRWY
Softkey (MFD only), or press the
MENU
Key and select “Load Airway”. The
LD AIRWY
Softkey or the “Load Airway” menu item is available only when
a valid airway entry waypoint has already been entered in the flight plan.
