190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
191
FLIGHT MANAGEMENT
FLIGHT PLAN WAYPOINT AND AIRWAY MODIFICATIONS
Active and stored flight plans can be edited at any time. Waypoints and airways can be added, modified, or
removed from any flight plan. Edits made to an active flight plan affect navigation as soon as they are entered.
Modifications to flight planned departures, arrivals, approaches, and missed approaches are discussed later in
the Procedures portion of Flight Management.
FLIGHT PLAN WAYPOINTS
Waypoints can be added to the active flight plan or any stored flight plan. Choose the flight plan, select
the desired point of insertion, enter the waypoint, and it is added in front of the selected waypoint. Flight
plans are limited to 100 waypoints (including waypoints within airways and procedures). If the number of
waypoints in the flight plan exceeds 100, the message “Flight plan is full. Remove unnecessary waypoints.”
appears and the new waypoint(s) are not added to the flight plan.
a
DDing
W
aypoints
NOTE:
Manually adding waypoints to a flight plan after a MANSEQ leg creates a lateral gap in the flight
plan. Time, fuel, and distance values for legs beyond the gap do not include the distance across the gap.
NOTE:
If the identifier entered in the ‘Waypoint Information’ Window has duplicates, a ‘Duplicate Waypoint’
Window is displayed. Use the
FMS
Knob to select the correct waypoint.
NOTE:
If the flight plan is successfully edited in the ‘Flight Plan’ Window from PFD while the MFD ‘FPL –
Active Flight Plan’ Page is in the process of being edited, the ‘Flight Plan Modified By Other User’ Window
will appear on the MFD. Press the
ENT
key to return to the ‘FPL – Active Flight Plan’ Page with the accepted
changes.
Figure 5-44 Active Flight Plan Waypoints
Enroute Waypoints
Origin Header
Destination Header
Enroute Header
