Garmin G1000 NXi Pilot'S Manual Download Page 38

Page: 38 / 538

190-02177-02 Rev. A

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

STEM

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

SYSTEM OVERVIEW

Turn

the small

FMS

Knob counter-clockwise to display a list of flight plan waypoints (the FPL list is populated

only when navigating a flight plan).

Turn

the small

FMS

Knob clockwise to display the Flight Plan, Nearest, Recent, or User waypoints, if

required.

Turn

the large

FMS

Knob clockwise to select the desired waypoint. The system automatically fills in the

identifier, facility, and city fields with the information for the selected waypoint.

Press the

ENT

Key to accept the waypoint entry.

Use the

FMS

Knob to enter an arrival time and press the

ENT

Key.

Use the

FMS

Knob to enter an arrival date and press the

ENT

Key.

With the cursor highlighting ‘Compute RAIM?’, press the

ENT

Key. Once RAIM availability is computed, one of

the following is displayed:

• ‘Compute RAIM?’—RAIM has not been computed for the current waypoint, time, and date combination

• ‘Computing Availability’—RAIM calculation in progress

• ‘RAIM Available’—RAIM is predicted to be available for the specified waypoint, time, and date

• ‘RAIM not Available’—RAIM is predicted to be unavailable for the specified waypoint, time, and date

Predicting RAIM availability at present position:

Select the ‘Aux - GPS Status’ Page.

If necessary, press the

RAIM

Softkey.

Push the

FMS

Knob. The ‘Waypoint’ Field is highlighted.

Press the

MENU

Key.

With ‘Set WPT to Present Position’ highlighted, press the

ENT

Key.

Press the

ENT

Key to accept the waypoint entry.

Use the

FMS

Knob to enter an arrival time and press the

ENT

Key.

Use the

FMS

Knob to enter an arrival date and press the

ENT

Key.

With the cursor highlighting ‘Compute RAIM?’, press the

ENT

Key. Once RAIM availability is computed, one of

the following is displayed:

• ‘Compute RAIM?’—RAIM has not been computed for the current waypoint, time, and date combination

• ‘Computing Availability’—RAIM calculation in progress

• ‘RAIM Available’—RAIM is predicted to be available for the specified waypoint, time, and date

• ‘RAIM not Available’—RAIM is predicted to be unavailable for the specified waypoint, time, and date

Summary of Contents for G1000 NXi



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands

Garmin G1000 NXi, Pilot'S Manual

Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands