Garmin G1000 NXi, Pilot'S Manual

Page: 257 / 538

190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
237
FLIGHT MANAGEMENT
7) Minimums
a) To set ‘Minimums’, turn the small FMS Knob to select ‘BARO’ or ‘TEMP COMP’ and press the ENT Key.
Turn the small
FMS
Knob to select the altitude, and press the
ENT
Key.
b) If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the small
FMS
Knob to
select the temperature (as reported at the destination airport), and press the ENT Key.
Or :
To skip setting minimums, press the
ENT
Key. The ‘Load?’ field is highlighted.
8) Press the
ENT
Key with ‘Load?’ highlighted to load the approach procedure; or turn the large
FMS
Knob to
highlight ‘Activate?’ and press the ENT Key to load and activate the approach procedure.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT APPROVED FOR GPS –
GPS guidance is for monitoring only. Load approach?’ With ‘Yes’ highlighted, press the
ENT Key.
Wh
en a visual approach is selected, the message ‘Obstacle clearance is not provided for visual approaches’ is
displayed. With ‘OK’ highlighted, press the
ENT
Key.
Loading an approach procedure into a stored flight plan:
1) Select a stored flight plan from the ‘FPL – Flight Plan Catalog’ Page.
2) Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’ and press the
ENT
Key; or press the
ENT
Key, turn the large
FMS
Knob clockwise to highlight “EDIT” and press the
ENT
Key. The ‘FPL – Stored Flight
Plan’ Page is displayed.
3) Press the
LD APR
Softkey; or press the
MENU
Key, select “Load Approach”, and press the
ENT
Key. The ‘PROC
– Approach Loading’ Page is displayed.
4) Select the airport and approach:
a) Use the
FMS
Knob to select an airport and press the
ENT
Key.
b) Select an approach from the list and press the
ENT
Key.
Or :
a) If necessary, push the
FMS
Knob to exit the approach list, and use the large
FMS
Knob to move the cursor
to the Approach ‘Channel’ Field.
b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to accept the approach
channel number. The airport and approach are selected.
5) Select a transition for the selected approach. Press the
ENT
Key.
6)
Press the ENT Key to load the selected approach procedure.
Activating a previously loaded approach:
1) Press the
PROC
Key. The ‘Procedures’ Window is displayed with ‘Activate Approach’ highlighted.
2) Press the
ENT
Key to activate the approach.