Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
120
AUDIO PANEL AND CNS
Figure 4-11 Loading the NAV Frequency from the ‘NRST – Nearest VOR’ Page
Press the
ENT
Key
to display the ‘Load
Frequency’ Window
Press the
VOR
or
FREQ
Softkey to place the cursor
in the respective window
Turn the
FMS
Knob to
select the desired NAV field
location. Press the
ENT
Key
again to load the frequency
into the selected location.
While enroute, NAV frequencies can also be auto-tuned from the ‘NRST – Nearest Airports’,
‘WPT – Airport Information’, ‘WPT – VOR Information’, and ‘NRST – Nearest Frequencies’ Pages on the MFD
in a similar manner using the appropriate softkeys or
MENU
Key, the
FMS
Knob, and the
ENT
Key.
AUTO-TUNING NAV FREQUENCIES ON APPROACH ACTIVATION
NOTE:
The primary NAV frequency is auto-tuned upon loading a VOR or ILS/Localizer approach.
NOTE:
When an ILS/LOC approach has been activated in GPS Mode, the system switches to NAV Mode as
the final approach course is intercepted (within 15 nm of the FAF). See the Flight Instruments Section for
details.
NAV frequencies are automatically loaded into the NAV Frequency field on approach activation, on the
PFD.
When loading or activating a VOR or ILS/LOC approach, the approach frequency is automatically transferred
to a NAV frequency field as follows:
