Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
127
AUDIO PANEL AND CNS
Figure 4-20 Ident Softkey and Indication
Ident
Indication
Press the
Ident
Softkey to Initiate
the ident Function
FLIGHT ID REPORTING
NOTE:
If the Flight ID is required but the system is not configured for it, contact a Garmin-authorized
service center for configuration.
When the Flight ID must be entered before flight operation, the identifier is placed in the ‘References’ Window
on the PFD. The Flight ID is not to exceed seven characters. No space is needed when entering Flight ID.
When a Flight ID contains a space, the system automatically removes it upon completion of Flight ID entry.
Entering a Flight ID:
1)
Press the
TMR/REF
Softkey to display the ‘References’ Window.
2)
Push the
FMS
Knob to activate the selection cursor, if not already activated.
3)
Turn the large
FMS
Knob to scroll down to the Flight ID.
4)
Turn the small
FMS
Knob to enter the desired Flight ID.
5)
Press the
ENT
Key to complete Flight ID entry.
If an error is made during Flight ID entry, pressing the
CLR
Key returns to the original Flight ID entry. While
entering a Flight ID, turning the
FMS
Knob counterclockwise moves the cursor back one space for each detent
of rotation. If an incorrect Flight ID is discovered after the unit begins operation, reenter the correct Flight ID
using the same procedure.
