Garmin G1000 NXi Pilot'S Manual Download Page 234

Page: 234 / 538

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

190-02177-02 Rev. A

STEM

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

214

FLIGHT MANAGEMENT

CHANGING A FLIGHT PLAN COMMENT (NAME)

Changing the active flight plan comment:

Press the

FPL

Key to display the ‘FPL – Active Flight Plan’ Page (MFD) or the ‘Flight Plan’ Window (PFD).

Push the

FMS

Knob to activate the cursor (not required on the PFD) and turn the large

FMS

Knob to highlight

the comment field.

Use the

FMS

Knobs to edit the comment.

Press the

ENT

Key to accept the changes.

Push the

FMS

Knob to deactivate the flashing cursor.

Changing a stored flight plan comment:

Press the

FPL

Key to display the ‘FPL – Active Flight Plan’ Page.

Turn the small

FMS

Knob clockwise one click to display the ‘FPL – Flight Plan Catalog’ Page.

Push the

FMS

Knob to activate the cursor and turn the

FMS

Knob to highlight the flight plan to be edited.

Press the

Edit

Softkey; or press the

MENU

Key, select ‘Edit Flight Plan’ and press the

ENT

Key. The ‘FPL – Stored

Flight Plan’ Page is displayed.

Turn the large

FMS

Knob to highlight the comment field.

Use the

FMS

Knobs to edit the comment.

Press the

ENT

Key to accept the changes.

Push the

FMS

Knob to remove the flashing cursor.

Summary of Contents for G1000 NXi



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands

Garmin G1000 NXi, Pilot'S Manual

Search results

Summary of Contents for G1000 NXi

Reviews:

Related manuals for G1000 NXi

Brands by name

Popular brands