Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
210
FLIGHT MANAGEMENT
Flight Plan Import/Export Results
Description
‘File contained user waypoints only.’
The file stored on the SD card did not contain a flight plan, only user waypoints.
One or more of these waypoints did not import successfully.
‘Too many points. Flight plan truncated.’
The flight plan on the SD card contains more waypoints than the system can
support. The flight plan was imported with as many waypoints as possible.
‘Some waypoints not loaded. Waypoints
locked.’
The flight plan on the SD card contains one or more waypoints the system cannot
find in the navigation database. The flight plan has been imported, but must be
edited within the system before it can be activated for use.
‘User waypoint database full. Not all
loaded.’
The flight plan file on the SD card contains user waypoints. The quantity of stored
user waypoints has exceeded system capacity, therefore not all the user waypoints
on the SD card have been imported. Any flight plan user waypoints that were not
imported are locked in the flight plan. The flight plan must be edited within the
system before it can be activated for use.
‘One or more user waypoints renamed.’
One or more imported user waypoints were renamed when imported due to
naming conflicts with waypoints already existing in the system.
‘Flight plan successfully exported.’
The stored flight plan was successfully exported to the SD card.
‘Flight plan export failed.’
The stored flight plan was not successfully exported to the SD card. The SD card
may not have sufficient available memory or the card may have been removed
prematurely.
Table 5-9 Flight Plan Import/Export Messages
NOTE:
If the imported flight plan contains a waypoint with a name that duplicates the name of a waypoint
already stored on the system, the system compares the coordinates of the imported waypoint with those of
the existing waypoint. If the coordinates are different, the imported waypoint is automatically renamed by
adding characters to the end of the name.
NOTE:
The exported flight plan will not contain any procedures or airways.
Importing a Flight Plan from an SD Card:
1)
Insert the SD card containing the flight plan in the top card slot on the MFD.
2)
Press the
FPL
Key to display the ‘FPL – Active Flight Plan’ Page on the MFD.
3)
Turn the small
FMS
Knob to select the ‘FPL – Flight Plan Catalog’ Page.
4)
Push the
FMS
Knob to activate the cursor.
5)
Turn either
FMS
Knob to highlight an empty or existing flight plan.
6)
Press the
Import
Softkey; or press the
MENU
Key, select “Import Flight Plan”, and press the
ENT
Key.
If an empty slot is selected, a list of the available flight plans on the SD card will be displayed.
Or
:
If an existing flight plan is selected, an “Overwrite existing flight plan? OK or CANCEL” prompt is displayed.
Press the
ENT
Key to choose to overwrite the selected flight plan and see the list of available flight plans on the
SD card. If overwriting the existing flight plan is not desired, select “CANCEL” using the
FMS
Knob, press the
ENT
Key, select another flight plan slot, and press the
Import
Softkey again.
