Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
492
APPENDIX B
15)
When all databases have been successfully transferred from the mobile device and appear in the Standby
column, remove and reapply power to the system.
16)
Press the
ENT
Key or the right-most softkey on MFD display to acknowledge the startup screen.
17)
Turn the large
FMS
Knob and select Aux.
18)
Turn the small
FMS
Knob and select Databases.
19)
Verify the standby databases transferred and are now in the Active column.
Figure B-10 ‘Aux - Databases’ Page with Updated Databases
20)
To manually activate any databases that did not transfer to the active column:
a)
Push the
FMS
Knob. The first database title on the screen will be selected.
b)
Turn the small
FMS
Knob as necessary to select the database title.
c)
Verify the correct database cycle information is shown for each database for each display.
Or
:
Press the
MENU
Key and select ‘Swap Stby/Actv’ using the small
FMS
Knob. Press the
ENT
Key. A cyan
double-sided arrow will appear indicating the standby database will become active.
d)
Remove and reapply power to the system.
e)
Press the
ENT
Key or the right-most softkey on MFD display to acknowledge the startup screen.
f)
Turn the large
FMS
Knob and select Aux.
g)
Turn the small
FMS
Knob and select Databases.
h)
Verify the standby databases transferred and are now in the Active column.
