Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
336
HAZARD AVOIDANCE
Switching between TIS modes:
1)
Select the ‘Map - Traffic Map’ Page.
2)
Press the
Standby
or
Operate
Softkey to switch between modes. The mode is displayed in the upper right
corner of the ‘Map - Traffic Map’ Page.
Or
:
a)
Press the
MENU
Key.
b)
Select ‘Operate Mode’ or ‘Standby Mode’ (choice dependent on current state) and press the
ENT
Key.
The annunciations to indicate the status of traffic information appear in a banner at the lower left corner of
maps on which traffic can be displayed, as shown in the following table.
Traffic Status Banner
Annunciation
Description
TA OFF SCALE
A Traffic Advisory is outside the selected display range*
Annunciation is removed when traffic comes within the selected display range
TA X.X ± XX
↕
System cannot determine bearing of Traffic Advisory**
Annunciation indicates distance in nm, altitude separation in hundreds of feet, and
altitude trend arrow (climbing/descending)
AGE MM:SS
Appears if traffic data is not refreshed within 6 seconds
If after another 6 seconds data is not received, traffic is removed from the display
The quality of displayed traffic information is reduced as the age increases
TRFC COAST
The displayed data is not current (6 to 12 seconds since last message)
The quality of displayed traffic information is reduced when this message is displayed
TRFC RMVD
Traffic is removed because it is too old for coasting (12 to 60 seconds since last message)
Traffic may exist within the selected display range, but it is not displayed
TRFC FAIL
Traffic data has failed
NO TRFC DATA
Traffic has not been detected
TRFC UNAVAIL
The traffic service is unavailable or out of range
*Shown as symbol on ‘Map - Traffic Map’ Page
**Shown in center of ‘Map - Traffic Map’ Page
Table 6-21 TIS Traffic Status Annunciations
