190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
227
FLIGHT MANAGEMENT
Procedure Loading Page Selection Softkeys
Figure 5-65 Departure Loading
Loaded Departure
Selected Departure
Loading a departure into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The ‘Procedures’ Window is displayed.
2)
Highlight ‘Select Departure’.
3)
Press the
ENT
Key. The ‘PROC – Departure Loading’ Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select a departure from the list and press the
ENT
Key.
6)
Select a runway (if required) and press the
ENT
Key.
7)
Select a transition (if required) and press the
ENT
Key. ‘Load?’ is highlighted.
8)
Press the
ENT
Key to load the departure procedure.
Loading a departure into the active flight plan from the ‘WPT – Departure Information’ Page:
1)
From the ‘WPT – Airport Information’ Page (first page in the ‘WPT’ Page Group), press the
DP
Softkey. The ‘WPT –
Departure Information’ Page is displayed, defaulting to the airport displayed on the ‘WPT – Airport information’ Page.
2)
To select another airport, push the
FMS
Knob to activate the cursor, enter an identifier/facility name/city, and
press the
ENT
Key.
3)
Select a different departure, if desired.
a)
Turn the large
FMS
Knob to highlight the Departure. The departure is previewed on the map.
b)
Turn the small
FMS
Knob to view the available departures. Press the
ENT
Key to select the departure. The
cursor moves to the ‘Runway’ Box. The departure is previewed on the map.
