190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
211
FLIGHT MANAGEMENT
7)
Turn the small
FMS
Knob to highlight the desired flight plan for importing.
8)
Press the
ENT
Key to initiate the import.
9)
Press the
ENT
Key again to confirm the import.
Exporting a flight plan to an SD Card:
1)
Insert the SD card into the top card slot on the MFD.
2)
Press the
FPL
Key to display the ‘FPL – Active Flight Plan’ Page on the MFD.
3)
Turn the small
FMS
Knob to select the ‘FPL – Flight Plan Catalog’ Page.
4)
Push the
FMS
Knob to activate the cursor.
5)
Turn the large
FMS
Knob to highlight the flight plan to be exported.
6)
Press the
Export
Softkey; or press the
MENU
Key, select “Export Flight Plan”.
7)
If desired, change the name for the exported file by turning the large
FMS
Knob to the left to highlight the
name, then use the small and large
FMS
knobs to enter the new name, and press the
ENT
Key.
8)
Press the
ENT
Key to initiate the export.
9)
Press the
ENT
Key to confirm the export.
INVERTING THE ACTIVE FLIGHT PLAN
A flight plan may be inverted (reversed) for navigation back to the original departure point. Inverting and
activating stored flight plans is discussed within the Stored Flight Plan Functions portion of this section.
Inverting the active flight plan:
1)
Press the
FPL
Key to display the ‘FPL – Active Flight Plan’ Page (MFD) or the ‘Flight Plan’ Window (PFD).
2)
Press the
MENU
Key, highlight ‘Invert Flight Plan’, and press the
ENT
Key. An ‘Invert Active Flight Plan?’
confirmation window is displayed.
3)
Highlight ‘OK’.
4)
Press the
ENT
Key to invert and activate the active flight plan. To cancel, press the
CLR
Key, or highlight
‘CANCEL’ and press the
ENT
Key.
DELETING THE ACTIVE FLIGHT PLAN
The active flight plan is overwritten when another flight plan is activated. Additionally, the system allows
the pilot to delete the active flight plan, which suspends navigation by the system.
Deleting the active flight plan:
1)
Press the
FPL
Key to display the ‘FPL – Active Flight Plan’ Page (MFD) or the Active ‘Flight Plan’ Window (PFD).
2)
Press the
MENU
Key, highlight ‘Delete Flight Plan’, and press the
ENT
Key. The ‘Delete all waypoints in flight
plan?’ Window is displayed.
3)
With ‘OK’ highlighted, press the
ENT
Key to delete the active flight plan. To cancel the request, press the
CLR
Key, or highlight ‘CANCEL’ and press the
ENT
Key.
