Creo CXP6000 Color Server, User Manual

Page: 61 / 514

Setting PPD File Parameters 47
Admin Page
Admin Page includes general information about the job, including paper
stock
parameters (Admin Page can also apply to completed jobs that
weren’t successful).
Admin page is printed in the same order as the job, before each set for
face-down printing and after each set for face-up printing.
No
(default) does not print an admin page with the job.
Yes
prints an admin page.
Slip Sheet
Yes
inserts a sheet offset from the job stock between jobs or copies of a
job or at the end of uncollated stacks of pages.
No
does not insert any slip-sheets.
Finisher Module
To select the printed output’s destination, select a finisher module from
the list:
OCT
(Offset Catch Tray) prints to the output cache tray.
If your printer is equipped with an HCS (High Capacity Stacker), select:
HCS/EHCS Top Tray
to print to the top tray
HCS/EHCS Stack Tray
to print to the stack tray, which is the internal tray
For the Xerox DocuColor 5252, 2060, and 2045 Digital Color Presses,
select the
Bypass Tray
option to print to the DFA.
If your printer is equipped with an HCSS (High Capacity Stacker
Stapler), select:
HCSS Top Tray
to print to the top tray
HCSS Stack Tray
to print to the stack tray (usually for many pages or
copies).
HCSS Staple Stack
to print a document that is already stapled
DFA Profile 1
/
DFA Profile 2
/
DFA Profile 3 / DFA Profile 4 /
DFA Profile 5
prints to the DFA (Document Finishing Architecture)
device. Select the required profile according to the profile set in the
Xerox DocuColor 6060 Digital Color Press.
Finisher Offset
Yes
shifts the sheets when a new page number is delivered. For example,
if you requested three copies of each page uncollated, the printing
output sequence is as follows, Page1, Page1, Page1, Offset, Page2, Page2,
Page2, Offset, and so on.
No
does not use this printing method.
Table 4: PPD parameters
PPD Parameter Printing Options