Creo CXP6000 Color Server, User Manual

Page: 362 / 514

348 Chapter 7 – Color Workflow
To select CMYK workflow options:
1.
In the
Original
list, select one of the following options:
•
Direct:
This is the default CMYK workflow. The CMYK elements
are printed without any color transformation.
•
Use Source CSA:
Uses the embedded CSA from the PostScript file.
2.
In the
Emulation
list, select the required emulation.
•
Select the
Emulate source paper tint
check box to emulate the
original paper tint.
•
Select
Emulate RGB elements
to convert RGB elements according
to the selected CMYK emulation method. The RGB elements
receive the same look as the CMYK elements, creating a consistent
appearance.
•
Select the
Preserve pure colors
check box to preserve pure cyan,
magenta, yellow, and black during transformation.
3.
In the
Rendering intent
list, select the required option.
Note: The system emulates the selected option during the RIP process. GCR
and CMYK Emulation do not affect the processed job.
Notes:
•
The Emulate source paper tint check box is available only if you
select Device Link as the emulation method.
•
When the Emulate source paper tint check box is selected,
Absolute Colorimetric will be used as the rendering method.
•
If the job is simplex, only the front side will be printed using the tint
emulation.
For more information about choosing the correct rendering intent, see To
set the RGB workflow options: on page 346.
Note: If you selected Device Link as the emulation method, you cannot
select a rendering intent because for each device link emulation a rendering
intent is already defined.