Creo CXP6000 Color Server, User Manual

Page: 258 / 514

244 Chapter 6 – Production Printing
•
Creep out
is used when you find that the page images are too close to
the spine. This problem can be resolved by selecting a value for
Creep
out
. This will move all the pages of the job further out towards the
outside margin (away from the spine) by the specified amount. This
movement takes place before the
Creep in
value is applied.
To set the creep options:
1.
In the
Creep in
area, select
Auto
to automatically set the
Creep in
based
on paper stock weight
Or:
Type the required amount for
Creep in
.
2.
In the
Creep out
area, type the required amount.
Imposition Templates
There are three types of templates you can use in the Spire CXP6000 color
server:
•
Collating templates, see Collating Templates on page 245
•
Predefined imposition templates, see Spire CXP6000 Color Server
Predefined Imposition Templates on page 245
•
User defined imposition templates, see User Defined Imposition
Templates on page 251
Note: Units of measurement (mm or inches) are set in the Settings window,
see Localization on page 421.