Chrysler 2015 Town & Country Owner'S Manual Download Page 635

Page: 635 / 726

regular intervals, such as every fuel stop. The best time to

check the engine oil level is about five minutes after a

fully warmed engine is shut OFF.
Checking the oil while the vehicle is on level ground will

improve the accuracy of the oil level readings. Maintain

the oil level between the MIN and MAX markings on the

dipstick. Adding one quart of oil when the reading is at

the MIN mark will result in a MAX reading on these

engines.

CAUTION!

Overfilling or underfilling will cause oil aeration, or
loss of oil pressure. This could damage your engine.

Change Engine Oil

The oil change indicator system will remind you that it is

time to take your vehicle in for scheduled maintenance.

Refer to the “Maintenance Schedule” for further informa-

tion.

NOTE: Under no circumstances should oil change in-
tervals exceed 10,000 miles (16,000 km) or twelve
months, whichever occurs first.

Engine Oil Selection

For best performance and maximum protection under all

types of operating conditions, the manufacturer only

recommends engine oils that are API Certified and meet

the requirements of Chrysler Material Standard MS-6395.

MAINTAINING YOUR VEHICLE 633

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands