Chrysler 2015 Town & Country Owner'S Manual Download Page 260

Page: 260 / 726

Enabling/Disabling ParkSense®

ParkSense® can be enabled and disabled through the

Customer-Programmable Features section of the EVIC.

The available choices are: OFF, Sound Only, or Sound and

Display. Refer to “Electronic Vehicle Information Center

(EVIC)/Personal Settings (Customer-Programmable Fea-

tures)” in “Understanding Your Instrument Panel” for

further information.
When ParkSense® is disabled, the instrument cluster will

display the “PARK ASSIST SYSTEM OFF” message for

approximately five seconds. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system is

disabled, the EVIC will display the “PARK ASSIST SYS-

TEM OFF” message for as long as the vehicle is in

REVERSE.

Service The ParkSense® Rear Park Assist
System

During vehicle start up, when the ParkSense® Rear Park

Assist System has detected a faulted condition, the

instrument cluster will actuate a single chime, once per

ignition cycle, and it will display the “SERVICE PARK

ASSIST SYSTEM” message. Refer to “Electronic Vehicle

Information Center (EVIC)” in “Understanding Your

Instrument Panel” for further information. When the

shift lever is moved to REVERSE and the system has

detected a faulted condition, the EVIC will display the

“SERVICE PARK ASSIST SYSTEM” message for as long

as the vehicle is in REVERSE. Under this condition,

ParkSense® will not operate.
If “SERVICE PARK ASSIST SYSTEM” appears in the

Electronic Vehicle Information Center (EVIC) after mak-

ing sure the rear fascia/bumper is free from snow, ice,

mud, dirt and debris, see your authorized dealer.

258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands