Chrysler 2015 Town & Country Owner'S Manual Download Page 376

Page: 376 / 726

Clock Setting Procedure

1. Push and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/

SCROLL control knob.

3. After adjusting the hours, push the right side TUNE/

SCROLL control knob to set the minutes. The minutes

will begin to blink.

4. Adjust the minutes using the right side TUNE/

SCROLL control knob. Push the TUNE/SCROLL con-

trol knob to save time change.

5. To exit, push any button/knob or wait five seconds.
The clock can also be set by pushing the SETUP button.

For vehicles equipped with satellite radio, push the

SETUP button, use the TUNE/SCROLL control to select

SET CLOCK, and then follow the above procedure,

starting at step 2. For vehicles not equipped with satellite

radio, push the SETUP button and then follow the above

procedure, starting at step 2.

INFO Button

Push the INFO button for an RDS station (one with call

letters displayed). The radio will return a Radio Text

message broadcast from an FM station (FM mode only).

RW/FF

Pushing the RW (Rewind) or FF (Fast Forward) buttons

causes the tuner to search for the next frequency in the

direction of the arrows. This feature operates in either

AM or FM frequencies.

TUNE Control

Turn the rotary TUNE/SCROLL control knob clockwise

to increase or counterclockwise to decrease the frequency.

374 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands