Chrysler 2015 Town & Country Owner'S Manual Download Page 329

Page: 329 / 726

8. Tire Pressure Monitoring Telltale Light — If Equipped

Each tire, including the spare (if provided),

should be checked monthly when cold and

inflated to the inflation pressure recommended

by the vehicle manufacturer on the vehicle

placard or tire inflation pressure label. (If your vehicle

has tires of a different size than the size indicated on the

vehicle placard or tire inflation pressure label, you should

determine the proper tire inflation pressure for those

tires.)
As an added safety feature, your vehicle has been

equipped with a Tire Pressure Monitoring System

(TPMS) that illuminates a low tire pressure telltale when

one or more of your tires is significantly under-inflated.

Accordingly, when the low tire pressure telltale illumi-

nates, you should stop and check your tires as soon as

possible, and inflate them to the proper pressure. Driving

on a significantly under-inflated tire causes the tire to

overheat and can lead to tire failure. Under-inflation also

reduces fuel efficiency and tire tread life, and may affect

the vehicle’s handling and stopping ability.
Please note that the TPMS is not a substitute for proper

tire maintenance, and it is the driver’s responsibility to

maintain correct tire pressure, even if under-inflation has

not reached the level to trigger illumination of the TPMS

low tire pressure telltale.
Your vehicle has also been equipped with a TPMS

malfunction indicator to indicate when the system is not

operating properly. The TPMS malfunction indicator is

combined with the low tire pressure telltale. When the

system detects a malfunction, the telltale will flash for

approximately one minute and then remain continuously

illuminated. This sequence will continue upon subse-

quent vehicle start-ups as long as the malfunction exists.

When the malfunction indicator is illuminated, the sys-

tem may not be able to detect or signal low tire pressure

as intended. TPMS malfunctions may occur for a variety

UNDERSTANDING YOUR INSTRUMENT PANEL 327

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands