Chrysler 2015 Town & Country Owner'S Manual Download Page 17

Page: 17 / 726

CAUTION!

An unlocked car is an invitation to thieves. Always
remove the Key Fob from the ignition and lock all
doors when leaving the vehicle unattended.

Key-In-Ignition Reminder

Opening the driver’s door when the Key Fob is in the

ignition and the ignition switch position is OFF or ACC,

a chime will sound to remind you to remove the key.

NOTE:

The Key-In-Ignition reminder only sounds when

the Key Fob is placed in the OFF or ACC ignition

position.
If your vehicle is equipped with Keyless Enter-N-Go™,

opening the driver’s door when the vehicle’s ignition

switch is placed in ACC or ON/RUN (engine stopped)

will cause the reminder chime to sound. Refer to “Start-

ing Procedures” in “Starting And Operating” for further

information.

SENTRY KEY®

The Sentry Key® Immobilizer system prevents unauthor-

ized vehicle operation by disabling the engine. The

system does not need to be armed or activated. Operation

is automatic, regardless of whether the vehicle is locked

or unlocked.
The system uses Key Fob with factory-mated Remote

Keyless Entry (RKE) transmitter and Wireless Ignition

Node (WIN) to prevent unauthorized vehicle operation.

Therefore, only Key Fobs that are programmed to the

vehicle can be used to start and operate the vehicle. The

system will shut the engine off in two seconds if an

invalid Key Fob is used to start the engine.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands