Chrysler 2015 Town & Country Owner'S Manual Download Page 553

Page: 553 / 726

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

The TPM sensors are regulated under one of the follow-

ing licenses:

United States

MRXMERCTX1

Canada

2546A-MERCTX1

FUEL REQUIREMENTS

3.6L Engine

This engine is designed to meet all emis-

sions regulations and provide excellent

fuel economy and performance when us-

ing high-quality unleaded “regular” gaso-

line having an octane rating of 87. The use

of premium gasoline is not recommended, as it will not

provide any benefit over regular gasoline in these en-

gines.
Light spark knock at low engine speeds is not harmful to

your engine. However, continued heavy spark knock at

high speeds can cause damage and immediate service is

required. Poor quality gasoline can cause problems such

as hard starting, stalling, and hesitations. If you experi-

ence these symptoms, try another brand of gasoline

before considering service for the vehicle.
Over 40 auto manufacturers worldwide have issued and

endorsed consistent gasoline specifications (the World-

wide Fuel Charter, WWFC) which define fuel properties

necessary to deliver enhanced emissions, performance,

and durability for your vehicle. The manufacturer recom-

mends the use of gasolines that meet the WWFC speci-

fications if they are available.

STARTING AND OPERATING 551

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands