Chrysler 2015 Town & Country Owner'S Manual Download Page 564

Page: 564 / 726

properly tightened. Refer to “Onboard Diagnostic Sys-

tem” in “Maintaining Your Vehicle” for further informa-

tion.
If the problem continues, the message will appear the

next time the vehicle is started. See your authorized

dealer as soon as possible.

VEHICLE LOADING

As required by National Highway Traffic Safety Admin-

istration regulations, your vehicle has a certification label

affixed to the driver’s side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the

specified GVWR and GAWR.

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to

the drivers side B-Pillar or the rear of the driver’s door.

The label contains the following information:

•

Name of manufacturer

•

Month and year of manufacture

•

Gross Vehicle Weight Rating (GVWR)

•

Gross Axle Weight Rating (GAWR) front

•

Gross Axle Weight Rating (GAWR) rear

•

Vehicle Identification Number (VIN)

•

Type of Vehicle

•

Month Day and Hour of Manufacture (MDH)

The bar code allows a computer scanner to read the VIN.

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, and cargo. The total

load must be limited so that you do not exceed the

GVWR.

562 STARTING AND OPERATING

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands