Chrysler 2015 Town & Country Owner'S Manual Download Page 465

Page: 465 / 726

NOTE:

•

It is not necessary to move the temperature settings.

The system automatically adjusts the temperature,

mode and fan speed to provide comfort as quickly as

possible.

•

The temperature can be displayed in English or Metric

units by selecting the “Display Units of Measure in”

customer-programmable feature. Refer to the “Elec-

tronic Vehicle Information Center (EVIC) — Customer-

Programmable Features” in this Section.

To provide you with maximum comfort in the automatic

mode, during cold start-ups, the blower fan will remain

on low until the engine warms up. The fan will engage

immediately if the Defrost mode is selected, or by chang-

ing the front blower knob setting.

Manual Operation Override

This system offers a full complement of manual override

features. The AUTO symbol in the front ATC display will

be turned off when the system is being used in the

manual mode.

Controlling The Rear Climate Controls From The
Front ATC Panel

The Three-Zone ATC system allows for adjustment of the

rear climate controls from the front ATC panel.

To change the rear system settings:

•

Push

REAR

button to change control to rear control

mode, Rear display (below) will appear. Control func-

tions now operate rear system.

UNDERSTANDING YOUR INSTRUMENT PANEL 463

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands