Chrysler 2015 Town & Country Owner'S Manual Download Page 447

Page: 447 / 726

film and videos and their soundtracks. When a prohib-

ited use of an unauthorized copy is detected, a message

will be displayed and playback or copying will be

interrupted. More information about Cinavia technology

is provided at the Cinavia Online Consumer Information

Center at http://www.cinavia.com. To request addi-

tional information about Cinavia by mail, send a

postcard with your mailing address to: Cinavia Con-

sumer Information Center, P.O. Box 86851, San Diego,

CA, 92138, USA.
This product incorporates proprietary technology under

license from Verance Corporation and is protected by

U.S. Patent 7,369,677 and other U.S. and worldwide

patents issued and pending as well as copyright and

trade secret protection for certain aspects of such tech-

nology. Cinavia is a trademark of Verance Corporation.

reserved by Verance. Reverse engineering or disassembly

is prohibited.

•

This product incorporates copyright protection tech-

nology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright pro-

tection technology must be authorized by Macrovi-

sion, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision. Reverse engineering or disassembly is

prohibited.

•

Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &

other U.S. and worldwide patents issued & pending.

DTS is a registered trademark and the DTS logos,

Symbol and DTS 2.0 Channel are trademarks of DTS,

•

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

UNDERSTANDING YOUR INSTRUMENT PANEL 445

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands