Chrysler 2015 Town & Country Owner'S Manual Download Page 32

Page: 32 / 726

3. Remove and replace the battery. When replacing the

battery, match the + sign on the battery to the + sign on

the inside of the battery clip, located on the back cover.

Avoid touching the new battery with your fingers.

Skin oils may cause battery deterioration. If you touch

a battery, clean it with rubbing alcohol.

4. To assemble the RKE transmitter case, snap the two

halves together.

General Information

This device complies with Part 15 of the FCC rules and

RSS 210 of Industry Canada. Operation is subject to the

following conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,

including interference that may cause undesired op-

eration.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

Separating Transmitter Case

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands