Chrysler 2015 Town & Country Owner'S Manual Download Page 159

Page: 159 / 726

Uconnect® Phone Button

The radio or steering wheel controls (if

equipped) will contain the two control buttons

(Uconnect® Phone

button and Voice Com-

mand

button) that will enable you to

access the system. When you push the button you will

hear the word Uconnect® followed by a BEEP. The

beep is your signal to give a command.

Voice Command Button

Actual button location may vary with the ra-

dio. The individual buttons are described in the

“Operation” section.

The Uconnect® Phone can be used with any Hands-Free

Profile certified Bluetooth® mobile phone. See the

Uconnect® website for supported phones. Refer to your

mobile service provider or the phone manufacturer for

details.

The Uconnect® Phone is fully integrated with the vehi-

cle’s audio system. The volume of the Uconnect® Phone

can be adjusted either from the radio volume control

knob or from the steering wheel radio control (right

switch), if so equipped.
The radio display will be used for visual prompts from

the Uconnect® Phone such as “CELL” or caller ID on

certain radios.

Operation

Voice commands can be used to operate the Uconnect®

Phone and to navigate through the Uconnect® Phone

menu structure. Voice commands are required after most

Uconnect® Phone prompts. You will be prompted for a

specific command and then guided through the available

options.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands