Chrysler 2015 Town & Country Owner'S Manual Download Page 79

Page: 79 / 726

As a guide, if you are shorter than average, you will

prefer the shoulder belt anchorage in a lower position,

and if you are taller than average, you will prefer the

shoulder belt anchorage in a higher position. After you

release the anchorage button, try to move it up or down

to make sure that it is locked in position.

NOTE:

The adjustable upper shoulder belt anchorage is

equipped with an Easy Up feature. This feature allows

the shoulder belt anchorage to be adjusted in the upward

position without pushing or squeezing the release but-

ton. To verify the shoulder belt anchorage is latched, pull

downward on the shoulder belt anchorage until it is

locked into position.

Seat Belt Extender

If a seat belt is not long enough to fit properly, even when

the webbing is fully extended and the adjustable upper

shoulder belt anchorage (if equipped) is in its lowest

position, your authorized dealer can provide you with a

Seat Belt Extender. The Seat Belt Extender should be used

only if the existing seat belt is not long enough. When the

Seat Belt Extender is not required for a different occu-

pant, it must be removed.

Adjustable Anchorage

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands