Chrysler 2015 Town & Country Owner'S Manual Download Page 233

Page: 233 / 726

Rotate the headlight switch clockwise to the first detent

for parking light and instrument panel light operation.

Rotate the headlight switch to the second detent for

headlight, parking light and instrument panel operation.

Automatic Headlights — If Equipped

This system automatically turns your headlights on or off

based on ambient light levels. To turn the system on, turn

the headlight switch to the extreme counterclockwise

position aligning the indicator with the AUTO on the

headlight switch. When the system is on, the Headlight

Time Delay feature is also on. This means your headlights

will stay on for up to 90 seconds after you turn the

ignition switch OFF. To turn the Automatic System off,

turn the headlight switch clockwise to the O (OFF)

position.

NOTE:

The engine must be running before the head-

lights will come on in the Automatic mode.

Headlight Switch With Halo Control

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands