Chrysler 2015 Town & Country Owner'S Manual Download Page 23

Page: 23 / 726

The lights will fade to off after approximately 30 seconds,

or they will immediately fade to off once the ignition

switch is turned to ON/RUN from the OFF position.

NOTE:

•

The front courtesy overhead console and door cour-

tesy lights will not turn off if the dimmer control is in

the “Dome ON” position (rotate horizontal thumb

wheel on the bottom of the switch to the far right

detent position).

•

The illuminated entry system will not operate if the

dimmer control is in the “Dome OFF” position (rotate

horizontal thumb wheel on the bottom of the switch to

the far left detent position).

REMOTE KEYLESS ENTRY (RKE) — IF
EQUIPPED

This system allows you to lock or unlock the doors and

liftgate, and activate the Panic Alarm, optional power

liftgate, left power sliding door, and right power sliding

door from distances up to approximately 66 ft (20 m)

using a hand-held Key Fob with RKE transmitter. The

RKE transmitter does not need to be pointed at the

vehicle to activate the system.

NOTE:

Inserting the Key Fob with RKE transmitter into

the ignition switch disables the system from responding

to any button presses from that RKE transmitter. Driving

at speeds 5 mph (8 km/h) and above disables the system

from responding to all RKE transmitter buttons for all

RKE transmitters.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands