Chrysler 2015 Town & Country Owner'S Manual Download Page 440

Page: 440 / 726

•

To change the current directory, use the remote con-

trol’s PROG UP and Down buttons or Rewind/skip

back and fast fwd/skip forward.

Disc Errors

If the DVD player is unable to read the disc, a

Disc Error

message is displayed on the Radio display and the disc is

automatically ejected. A dirty, damaged, or incompatible

disc format are all potential causes for a

Disc Error

message.
If a disc has a damaged track which results in audible or

visible errors that persists for 2.0 seconds, the DVD

player will attempt to continue playing the disc by

skipping forward 1.0 to 3.0 seconds at a time. If the end

of the disc is reached, the DVD player will return to the

beginning of the disc and attempt to play the start of the

first track.

The DVD player may shut down during extremely hot

conditions, such as when the vehicle’s interior tempera-

ture is above 120° F (49° C). The Blu-ray™ Player may

shut down when the vehicle’s interior temperature ex-

ceeds 140° F (60° C). When this occurs, the DVD/Blu-

ray™ Player will display

High Temp

and will shut off

the display until a safe temperature is reached. This

shutdown is necessary to protect the optics of the DVD/

Blu-ray™ Player.
The Blu-ray™ player may require additional reading

time during extremely cold weather conditions. When

this occurs, allow the vehicles interior temperature to

warm, then insert disc into player.

438 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands