Chrysler 2015 Town & Country Owner'S Manual Download Page 531

Page: 531 / 726

WARNING!

(Continued)

•

Unequal tire pressures from one side of the vehicle
to the other can cause the vehicle to drift to the
right or left.

•

Always drive with each tire inflated to the recom-
mended cold tire inflation pressure.

Both under-inflation and over-inflation affect the stability

of the vehicle and can produce a feeling of sluggish

response or over responsiveness in the steering.

NOTE:

•

Unequal tire pressures from side to side may cause

erratic and unpredictable steering response.

•

Unequal tire pressure from side to side may cause the

vehicle to drift left or right.

Economy

Underinflated tires will increase tire rolling resistance

resulting in higher fuel consumption.

Ride Comfort And Vehicle Stability

Proper tire inflation contributes to a comfortable ride.

Over-inflation produces a jarring and uncomfortable ride.

Tire Inflation Pressures

The proper cold tire inflation pressure is listed on the

driver’s side B-Pillar or rear edge of the driver’s side door.
At least once a month:

•

Check and adjust tire pressure with a good quality

pocket-type pressure gauge. Do not make a visual judge-

ment when determining proper inflation. Tires may look

properly inflated even when they are under-inflated.

•

Inspect tires for signs of tire wear or visible damage.

STARTING AND OPERATING 529

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands