Chrysler 2015 Town & Country Owner'S Manual Download Page 42

Page: 42 / 726

The Unlock Doors Automatically On Exit feature will not

operate if there is any manual operation of the power

door locks (lock or unlock).
On vehicles equipped with the optional Electronic Ve-

hicle Information Center (EVIC), refer to “Electronic

Vehicle Information Center (EVIC)/Personal Settings

(Customer-Programmable Features)” in “Understanding

Your Instrument Panel” for further information.

NOTE:

Use the Lock Doors Automatically at 15 mph

(24 km/h) and Unlock Doors Automatically On Exit

features in accordance with local laws.

KEYLESS ENTER-N-GO™

The Passive Entry system is an enhancement to the

vehicle’s Remote Keyless Entry (RKE) system and a

feature of Keyless Enter-N-Go™. This feature allows you

to lock and unlock the vehicle’s door(s) without having to

push the RKE transmitter lock or unlock buttons.

NOTE:

•

Passive Entry may be programmed ON/OFF; refer to

“Electronic Vehicle Information Center (EVIC)/

Personal Settings (Customer-Programmable Fea-

tures)” in “Understanding Your Instrument Panel” for

further information.

•

If a Passive Entry door handle has not been used for an

extended period of time, the Passive Entry feature for

the handle may time out. Pulling the deactivated front

door handle will reactivate the door handle’s Passive

Entry feature.

•

If wearing gloves on your hands, or if it has been

raining on the Passive Entry door handle, the unlock

sensitivity can be affected, resulting in a slower re-

sponse time.

40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands