Chrysler 2015 Town & Country Owner'S Manual Download Page 394

Page: 394 / 726

Using This Feature

By using an iPod® cable, or an external USB device to

connect to the USB port:

•

The audio device can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,

etc.) information on the radio display.

•

The audio device can be controlled using the radio

buttons to Play, Browse, and List the iPod® contents.

•

The audio device battery charges when plugged into

the USB/AUX connector (if supported by the specific

audio device).

Controlling The iPod® Or External USB Device
Using Radio Buttons

To get into the iPod®/USB/MP3 control mode and

access a connected audio device, either push the “AUX”

button on the radio faceplate or push the VR button and

say

USB

Switch to USB.

Once in the iPod®/USB/

MP3 control mode, audio tracks (if available from audio

device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod®/USB/MP3 control mode, the

iPod® or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio

faceplate may be used to control the iPod® or external

USB device and display data:

•

Use the

TUNE

control knob to select the next or

previous track.

•

Turning it clockwise (forward) by one click, while

playing a track, skips to the next track or push the VR

button and say

Next Track.

•

Turning it counterclockwise (backward) by one click,

will jump to the previous track in the list or push the

VR button and say

Previous Track.

392 UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands