Chrysler 2015 Town & Country Owner'S Manual Download Page 660

Page: 660 / 726

•

Blot any remaining stain with a clean, damp towel.

•

For tough stains, apply MOPAR® Total Clean, or a

mild soap solution to a clean, damp cloth and remove

stain. Use a fresh, damp towel to remove soap residue.

•

For grease stains, apply MOPAR® Multi-Purpose

Cleaner to a clean, damp cloth and remove stain. Use

a fresh, damp towel to remove soap residue.

•

Do not use any harsh solvents or any other form of

protectants on Stain Repel products.

Interior Care
Instrument Panel Surfaces

The instrument panel cover has a low glare surface,

which minimizes reflections in the windshield. Do not

use protectants or other products which may cause

undesirable reflections. Use soap and warm water to

restore the low glare surface.

Cleaning Interior Trim

Interior trim should be cleaned starting with a damp

cloth, a damp cloth with MOPAR® Total Clean or equiva-

lent, then MOPAR® Spot & Stain Remover or equivalent

if absolutely necessary. Do not use harsh cleaners or

Armor All®. Use MOPAR® Total Clean or equivalent to

clean vinyl upholstery.

Cleaning Leather Upholstery

MOPAR® Total Clean or equivalent is specifically recom-

mended for leather upholstery.
Your leather upholstery can be best preserved by regular

cleaning with a damp soft cloth. Small particles of dirt

can act as an abrasive and damage the leather upholstery

and should be removed promptly with a damp cloth.

Stubborn soils can be removed easily with a soft cloth

and MOPAR® Total Clean or equivalent. Care should be

taken to avoid soaking your leather upholstery with any

658 MAINTAINING YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands